BOSSONG POWDER ACTUATED AND GAS FASTENING SYSTEM

BOSSONG POWDER ACTUATED AND GAS FASTENING SYSTEM

BOSS 8000 – BOSS 8000-M75 Bossong P.A. tool approved for use with nails up to 75 mm. Automatic self-coking piston. Automatic cartridge advance system. Loads 6,8/11 ML. Low velocity tool: maximal speed of fasteners is smaller than 100 m/s. Firing of the cartridges is possible under the pressure of at least 1,5 time the weight of the Tool. Minimal recoil and very low noise thanks to the inside silencer. Version…

Read More
Chemical Anchors

Chemical Anchors

Chemical anchors have been used since 1950 worldwide. Unlike “mechanical anchors”, chemically bonding epoxy resin has the power to spread the load on the entire fastening Onface which results in very high loading capacity Chemical anchoring is recommended for all kinds of building materials: concrete, reinforced concrete, stone, solid brick, hollow brick, marble, or similar, and can be used in different environments and at varying temperatures. It also has the inherent…

Read More
Mechanical Anchors

Mechanical Anchors

STAHLFIX BOLT ANCHORS are made of regular carbon steel of the mechanical property, designed for fastening of lightweight structures. Applications Designed for fastening of lightweight structures arranged temporarily, e.g. falsework, board platforms etc. Fastening of lift shaft protective barriers Fastening of cable raceways and mechanical installations. Advantages • Very short intallation time, up to 50% shorter compared with traditional anchors • Easy and fast anchor removal • Distribution of stresses…

Read More
Threaded studs

Threaded studs

Stahlfix Studs 5.8 grade zinc coated steel studs come complete with a nut and washer and has a hex head for installation using a rotary hammer drill. Additionally the point-cut centre tip is necessary for spin installation systems. Description Stahlfix Studs 5.8 grade zinc coated steel studs come complete with a nut and washer and has a hex head for installation using a rotary hammer drill. Additionally the point-cut centre…

Read More
Asphalte fixings

Asphalte fixings

STAHLFIX ASPHALTE FIXING point re-usable with full strength, fully installed in minutes. The most durable asphalt fixing.   Use with Stahlfix EASF (Chemical Anchoring Resin) Fixing point re-usable with full strength Fully installed in minutes Clean and tidy The solution for a temporary fixing & durable fixing Strength of tarmac & asphalt is fully maintained Roads, Car parks, Playgrounds, Industrial, Home.  Brochure LEED Certificate Brochure EASF

Read More
Concrete repair

Concrete repair

Stahlfix Metoset PSF is a ready to use product for repairing cracks and concrete, and is also ideal as a bonding agent between materials. It is based on a high quality polyester resin and it is characterized by its high compressive strength and tensile strength. Description Stahlfix Metoset PSF is a ready to use product for repairing cracks and concrete, and is also ideal as a bonding agent between materials….

Read More
Wood reparation

Wood reparation

STAHLFIX METOLUX FOR WOOD REPARATION 2 Part Pre-Mix Wood Filler is an innovative two-part high strength polyester wood filler designed to guarantee the proper ratio mix of hardener and resin to provide the strongest repair possible to wood imperfections. Description Metolux 2 Part Pre-Mix Wood Filler is an innovative two-part high strength polyester wood filler designed to guarantee the proper ratio mix of hardener and resin to provide the strongest…

Read More
Natural stones fixings systems

Natural stones fixings systems

Sogivaswiss SA offers in collaboration with the European house Fixinox (Belgium) natural stone fixing systems and architectural concrete anchors… Natural stone fixing anchors Brick support Anchors sandwich panels systems Lifting system , Bar coupler and other products. Expertise, design, manufacturing and delivery on site. Technical details and information are available on the website : www.fixinox.com

Read More
LENTON

LENTON

Jonction d’armatures par filetage conique. LENTON est le système de jonction d’armatures par filetage conique le plus utilisé au monde. Fiabilité démontrée, conception largement facilitée, économique. Résiste à l’épreuve du temps et répond aux exigences des normes. Sismiques et explosions produites par l’homme. Jonction d’armatures par filetage conique . LENTON est le système de jonction d’armatures par filetage conique le plus utilisé au monde . Fiabilité démontrée, conception largement facilitée,…

Read More